Textur brush strokes and stripes Patterned HTV 171

• Great For Applying to Cotton, Polyester, or Cotton/Poly Blend Materials

• Matte finish, great for both light and dark-colored fabrics

• Can Be Used With A Standard Home Iron

• Cut With Any Vinyl Cutter

• Cut Printed Material face up ( do not mirror)

•  Application Tape (5" x 12")is included

• Preheat: 3-4 Seconds 

• Temperature: 300° F / 149° C 

• Pressure: Medium 

• Time: 15 Seconds

• Peel: Hot/WARM

-PUFF HTV

This Patterned Puff HTV product already has transfer film applied, so you don't need to purchase a separate transfer mask tape. 

It helps to create very unique designs and will set you apart from the normal sort of designs that can be applied to garments.

Suitable to be used with a heat press, this PUFF HTV is easy to weed which will speed up your production time and increase efficiency.

• Great For Applying to Cotton, Polyester, or Cotton/Poly Blend Materials

• Matte finish, great for both light and dark-colored fabrics

• Can Be Used With A Heat press. Do Not Use with a Home Iron

• Cut With Any Vinyl Cutter

• Cut White face up (Mirror Cut)

• Cannot be used by overlapping layers with other HTV or DTF.

• Preheat: 3-4 Seconds to remove moisture (Must do)

• Temperature: 285° -F-305 ° F

• Pressure: Medium • Time: 8-10 Seconds

• Peel: Hot/WARM

Try using it at a low temperature first, and if the puff doesn't work well, try heat-pressing it by raising it by 5 degrees.

If the temperature is too high, unwanted wrinkles may occur, so we recommend a sample test with a small shape if possible.

-Glitter HTV

• Great For Applying to Cotton, Polyester, Leather or Cotton/Poly Blend Materials

• Can Be Used With A Standard Home Iron

• Cut With Any Vinyl Cutter Thickness: 400 microns

• Cut Printed Material face up ( do not mirror)

• Application Tape (12" x 10") for Glitter HTV is included

• Preheat: 3-4 Seconds 

• Temperature: 317° F / 158° C

• Pressure: Medium

• Time: 17 Seconds 

• Peel: WARM /COLD